TCP/IP(v4) tab
Use the TCP/IP(v4) tab to configure basic IPv4 settings on the print server. For additional parameters, see the Advanced tab.
TCP/IP(v4) tab
|
|
|
|
|
| Method that the HP Jetdirect print server uses for its IP configuration parameters: BOOTP (default), DHCP, Manual, or Auto IP.
|
| BOOTP or DHCP IP parameters are automatically configured by a BOOTP or DHCP server each time the print server is turned on.
|
| Manual Enter IP parameters using this Web page or using other available tools.
|
| Auto IP A unique link-local address 169.254.x.x is assigned.
|
|
|
|
| Manually assign the IP address on the HP Jetdirect print server.
|
| This IP address uniquely identifies a node on a TCP/IP network. Duplicate IP addresses on a TCP/IP network are not allowed.
|
|
|
|
| Manually assign a subnet mask if subnetting is used. A subnet mask is a 32-bit number. When applied to an IP address, the subnet mask determines which bits specify the network and subnet, and which bits uniquely specify the node.
|
|
|
|
| IP address of a router or computer that is used to connect to other networks or subnetworks.
|
|
HP Jetdirect Print Servers TCP/IP(v4) tab