HP Jetdirect Configuration/General Information

HP Jetdirect Configuration/General Information


The following table provides general HP Jetdirect print server configuration information. For error messages, see Error messages.


HP Jetdirect Configuration/General Information
Message
Description
NETWORK CONNECTION TYPE
Specifies the type of network connection: Wireless or Wired.
STATUS
Current state of the HP Jetdirect print server.
I/O CARD READY, or READY Successfully connected to the network and is awaiting data.
I/O CARD INITIALIZING, or INITIALIZING Initializing the network protocols. For more information, see the status line for each protocol on the configuration page.
I/O CARD NOT READY, or ERROR Problem detected with the print server or its configuration.
An error code and message is displayed if the print server is not ready. For more information, see Error messages.
DATA RATE DETECTED
Specifies the network data rate depending on the type of network connection:
1–54 Mbps (Wireless 802.11g)
10 Mbs, 100 Mbps, 1000 Mbps (Wired Ethernet)
MODEL NUMBER
Product number of the HP Jetdirect print server (for example, J7961G)
LINK CONFIG
Specifies the active link communication mode:
802.11: Wireless 802.11g
10T HALF: 10 Mbps, half-duplex (wired port)
10T FULL: 10 Mbps, full-duplex (wired port)
100TX HALF: 100Mbps, half-duplex (wired port)
100TX FULL: 100Mbps, full-duplex (wired port)
HARDWARE ADDRESS
The 12-digit hexadecimal network hardware (MAC) address of the HP Jetdirect print server installed in the printer or device. This address is assigned by the manufacturer.
PORT SELECT
(Ethernet only) Specifies the port detected for use on the HP Jetdirect print server:
NONE: The print server is not connected to the network.
RJ-45: The RJ-45 network port is connected.
FIRMWARE VERSION
Firmware revision number of the HP Jetdirect print server currently installed in the printer.
LAA
Locally administered address (LAA) identifies the specified LAN hardware address of a print server, which is required by some network adiministrators. The default address is the print server’s factory-default LAN hardware address.
MANUFACTURING ID
Manufacturing identification code for use by HP online support personnel.
S/N
HP Jetdirect serial number.
DATE MANUFACTURED
Manufacture date of the HP Jetdirect print server.
HP Jetdirect Print Servers HP Jetdirect Configuration/General Information