IPX/SPX protocol information
Information in this section of the HP Jetdirect configuration page is described in IPX/SPX configuration information. For error messages, see Error messages.
IPX/SPX configuration information
|
|
|
|
|
| Current IPX/SPX protocol status.
|
| READY Print server is awaiting data.
|
| DISABLED Manually disabled.
|
| INITIALIZING Registering the node address or name. An additional status message might also displayed.
|
| An error code and message is displayed if the print server is not ready. For more information, see Error messages.
|
|
|
|
| AUTO SELECT Automatically sense and limit to the first one detected.
|
| EN_8023 Limit to IPX over IEEE 802.3 frames. All others are counted and discarded.
|
| EN_II Limit to IPX over Ethernet frames. All others are counted and discarded.
|
| EN_8022 Limit to IPX over IEEE 802.2 with IEEE 802.3 frames. All others are counted and discarded.
|
| EN_SNAP Limit to IPX over SNAP with IEEE 802.3 frames. All others are counted and discarded.
|
|
|
|
| Network column specifies the network number associated with a protocol frame type used for communication between a server and the HP Jetdirect print server. UNKNOWN Determining which network number to use.
|
| Frame Type column identifies the frame type used with the associated network number: EN_8023, EN_8022, EN_II, EN_SNAP. Unless a specific frame type is manually set, the print server automatically determines the protocol frame type by listening to the network data. DISABLED Frame type for that network is manually configured.
|
| RCVD column displays the packets received for each frame type.
|
|
HP Jetdirect Print Servers IPX/SPX protocol information