TCP/IP protocol information
Information in this section of the HP Jetdirect configuration page is described in the following table. For general TCP/IP configuration parameters, see TCP/IP configuration information. For IPv4 parameters, see IPv4 Section. For IPv6 parameters, see IPv6 Section. For error messages, see Error messages.
TCP/IP configuration information
|
|
|
|
|
| Status of IPv4 and IPv6 protocols on the print server:
|
| Enabled Protocol is active.
|
| Disabled Protocol is inactive.
|
|
|
|
| Host name configured on the print server. It might be truncated.
|
| Not Specified Host name not specified in a BOOTP response or TFTP configuration file.
|
| NPIxxxxxx Default name is NPIxxxxxx, where xxxxxx represents the last six digits of the LAN hardware (MAC) address.
|
|
|
|
| DNS name of the IPv4 domain in which the HP Jetdirect print server resides (for example, support.company.com). This is not the fully qualified DNS name (for example, printer1.support.company.com) because the host printer name is not included.
|
| Not Specified Domain name not configured on the print server.
|
|
|
|
| DNS name of the IPv6 domain in which the HP Jetdirect print server resides (for example, support.company.com). This is not the fully qualified DNS name (for example, printer1.support.company.com) because the host printer name is not included.
|
| Not Specified Domain name not configured on the print server.
|
|
|
|
| IPv4 address of the DNS server.
|
| Not Specified Primary DNS server not configured on the print server.
|
|
|
|
| IPv4 address of the DNS server.
|
| Not Specified Secondary DNS server not configured on the print server.
|
|
|
|
| IPv6 address of one or more DNS servers.
|
| Not Specified IPv6 DNS server not configured on the print server.
|
|
|
|
| IP address of the WINS server.
|
| Not Specified WINS server’s IP address not detected or configured.
|
|
|
|
| Timeout value expressed in seconds after which the print server closes an idle TCP print data connection. Values are integers between 0 and 3600. A value of zero turns off the timeout mechanism. The default value is 270 seconds.
|
|
This section provides information about the following topics:
HP Jetdirect Print Servers TCP/IP protocol information