Security settings
This section of the Security page displays similar information to that provided by the standard HP Jetdirect configuration page. See the following table.
General Information
|
|
|
|
|
| EAP/802.1X client authentication setting to use.
|
| Specified Use an 802.1X authentication protocol other than EAP-TLS/EAP-PEAP.
|
| Not Specified No authentication specified.
|
|
|
|
| Enabled Enabled and operating as configured.
|
| Policy Failed Print server failed to implement the IPsec policy. You might need to reset security (using the control panel or embedded Web server), or perform a cold-reset of the print server.
|
|
|
|
| IP Administrator password is configured on the print server. This password is shared by Telnet, the embedded Web server, and HP Web Jetadmin to control access to print server configuration parameters. (Consists of up to 16 alphanumeric characters.)
|
| Not Specified Password is not set.
|
| Clear the password using a cold reset.
|
|
|
|
| Expiration date of the digital certificate for SSL/TLS encrypted security. The date is in UTC format (for example, 2012-10-02 12:45 UTC).
|
| Not Applicable Digital certificate is not installed.
|
|
|
|
| SNMP versions enabled on the print server.
|
| Disabled All versions are disabled. No SNMP access is allowed.
|
| 1;2 SNMP v.1 and SNMP v.2c supported, and SNMP v.3 is disabled, or not supported.
|
| 1;2;3-na/np SNMP v.1, v.2c, and v.3 are enabled. v.3 is enabled with the minimum security of no authentication (na) and no privacy (np).
|
| 1;2;3-a/np SNMP v.1, v.2c, and v.3 are enabled. v.3 is enabled with the minimum security of authentication enabled (a) but no privacy (np).
|
| 1;2;3-a/p SNMP v.1, v.2c, and v.3 are enabled. v.3 is enabled with the minimum security of authentication (a) with privacy (p) enabled.
|
| 3-na/np SNMP v.1 and v.2c are disabled. SNMP v.3 is enabled with the minimum security of no authentication (na) and no privacy (n).
|
| 3-a/np SNMP v.1 and v.2c are disabled. SNMP v.3 is enabled with the minimum security of authentication enabled (a) but no privacy (np).
|
| 3-a/p SNMP v.1 and v.2c are disabled. SNMP v.3 is enabled with the minimum security of authentication (a) with privacy (p) enabled.
|
|
|
|
| SNMP set community name is set on the HP Jetdirect print server. An SNMP set community name is a password for write access to SNMP control functions (SNMP SetRequests) on the HP Jetdirect print server.
|
| Not Specified Set community is not set.
|
| Specified Set community is set.
|
|
|
|
| SNMP get community name is configured on the HP Jetdirect print server. This is a password to determine which SNMP GetRequests the HP Jetdirect print server responds to. If a Get community name is set, the print server responds to either a user specified community name or the factory-default.
|
| Not Specified Get community is not set.
|
| Specified Get community is set.
|
|
|
|
| (IPv4 only) Access control list is configured on the HP Jetdirect print server. This list specifies the IP address of individual systems, or IP network of systems, that are allowed access to the print server and device.
|
| Specified Host access list is configured.
|
| Not Specified Host access list is not configured.
|
|
|
|
| Use encrypted communications between a browser and the HP Jetdirect embedded Web server.
|
| Optional (HTTPS/HTTP) Allows un-encrypted communication using standard HTTP ports, as well as encrypted communications using HTTPS.
|
| HTTPS Required Allow only encrypted communications on HTTPS.
|
|
HP Jetdirect Print Servers Security settings