Use Telnet to remove an IP address
To erase the IP address during a Telnet session, use the following command line entries:
| 1.
|
| Type cold-reset, then press Enter.
|
|
| 2.
|
| Type quit, then press Enter to exit Telnet.
|
|
| 3.
|
| Turn the print server off and then on.
|
|
| NOTE:
|
This procedure resets all TCP/IP parameters. Parameters for other subsystems such as IPX/SPX or AppleTalk are not affected.
To reset all parameters to factory default values, see Troubleshoot the HP Jetdirect print server.
|
HP Jetdirect Print Servers Use Telnet to remove an IP address