Use the printer control panel
HP Jetdirect EIO or embedded print servers provide a configuration menu that you can open from the printer’s control panel. Using this menu, you can enable or disable network protocols and set basic network parameters.
| NOTE:
|
Control panel configuration support of specific IPv4/IPv6 and IPsec networking parameters depends on the HP Jetdirect print server and printer.
For instructions about using the control panel for your printer, see your printer documentation.
|
When accessing the HP Jetdirect menu from the printer’s control panel, some TCP/IP network configuration parameters that you can set include the following (see HP Jetdirect control panel menus (V.38.xx) for additional parameters):
| ●
|
|
| ●
|
|
| ●
|
|
| ●
|
| Other network protocols (IPX/SPX, AppleTalk, DLC/LLC)
|
|
| ●
|
|
| ●
|
| Link configuration settings
|
|
To configure TCP/IP parameters not available from the control panel configuration, use an alternate configuration tool, such as Telnet/IPv4 or the embedded Web server.
If the HP Jetdirect print server is configured with TCP/IP parameters from the printer control panel, the configuration is saved on the print server when turned off and then on.
HP Jetdirect Print Servers Use the printer control panel