Disable an HP Jetdirect embedded print server (V.38.xx)
| NOTE:
|
You can disable HP Jetdirect EIO and external print servers by disconnecting them from the printer/MFP.
|
You can disable an HP Jetdirect embedded print server by using the printer/MFP Service menu. This can help you isolate faults to either the printer or the print server. To disable the print serer, use the following steps:
| 1.
|
| Turn the printer on and watch for the memory count to begin.
|
|
| 2.
|
Press and hold the Select  button (or the 6 button on MFPs with numeric keypads) until the three control panel lights (Ready, Data, Attention) blink and then remain on.
|
|
| 3.
|
| Release the Select button (or 6 button). The control panel displays Select.
|
|
| 4.
|
|
| 5.
|
| Press the Select button (or 6 button) to disable the embedded print server and then continue its turn-on sequence.
|
|
| 6.
|
| Verify whether the printer/MFP properly completes its turn-on sequence.
|
|
To enable the embedded print server, use the same instructions except select Embedded LAN enable in step 4.
HP Jetdirect Print Servers Disable an HP Jetdirect embedded print server (V.38.xx)
button (or 9 button) until