Unable to communicate during initial setup
If you use wireless communications to set up the print server, verify the following:
| ●
|
| Your wireless computer is configured to match the default wireless network settings on the HP Jetdirect print server:
|
| ❑
|
| Communication Mode: Ad Hoc
|
|
| ❑
|
| Network Name (SSID): hpsetup
|
|
| ❑
|
| Encryption (WEP): <Disabled>
|
|
| NOTE:
|
The network name (SSID) is case-sensitive. Be sure to specify “hpsetup” using lowercase characters.
|
|
| ●
|
| The HP Jetdirect print server is turned on and operating properly (print the configuration page).
|
|
| ●
|
| You are within range of the HP Jetdirect print server.
|
|
| ●
|
| There are fewer than six devices total on the ad hoc network (with SSID “hpsetup”).
|
|
| ●
|
| There is no access point in the vicinity that is configured with an SSID of “hpsetup”.
|
|
| ●
|
| Multiple print servers are not being configured at the same time. If there are multiple print servers, turn all off except the one you want to configure.
|
|
HP Jetdirect Print Servers Unable to communicate during initial setup